Blogs

Daihatsu 5DC-17 Auxiliary Engine Crankshaft In Situ Repair

Daihatsu 5DC-17 engine crankshaft has a unique design and dimensions of crankshaft.

Following are the main dimensions of crankpins:

  • Crankpin standard diamete: 145mm
  • Crankpin Bearing width: 64 mm

As can be seen from the above dimensions, Daihatsu engine crankshaft have small diameter and bearing width is only 64 mm which is considered to be less for fitment of onsite crankshaft grinding and polishing machine on the crank pin diameter.

RA Power Solutions which is the leading manufacturing and exporter of onsite crankshaft grinding machine and of course onsite crankshaft repair company extends services all over the world for the last forty three years have developed a special purpose onsite crankshaft grinding machine by which the grinding of crankpins of Daihatsu 5DC-17 Engine is possible without removing the crankshaft and sending it to the workshop. 
Damage Crankpin before Repair of Daihatsu 5DC-17 crankshaft    
Repair of Crankpin of Daihatsu 5DC-17

Damage Crankpin before Repair of Daihatsu 5DC-17 crankshaft

 

Stop rejecting, replacing crankshaft of Daihatsu 5DC-17 Engine or sending it to workshop for repair

We have observed that shipping companies are forced to remove the crankshaft from the block and send it to the workshop for grinding. Alternatively they are advised to replace it with the new one, this costs the shipping company exorbitantly.

RA Power Solutions have successfully repaired more than hundred crankshafts of Daihatsu 5DC-17 engine for leading shipping companies all over the world.

We also maintain a large stock of undersize crank pin bearings.

Crankpin of Daihatsu 5DC-17 after grinding/polishing

Crankpin of Daihatsu 5DC-17 after grinding/polishing
Crankpin of Daihatsu 5DC-17 Engine Crankshaft after Repair

 For more details, please email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Copyright © RA Power Solutions 2024. All rights reserved.